The University of Southampton

Electronics helps to create a STORM in space

Published: 
14 February 2008
Illustration

Dr Neil Ross of ECS was part of the STORM project team which designed and developed a flight instrument now in orbit on the space shuttle Atlantis.

The Southampton Transient Oxygen and Radiation Monitor (STORM) instrument was on board Atlantis when it was launched earlier this week from the Kennedy Space Center in Cape Canaveral, Florida, destined for the International Space Station. STORM will be used in an experiment called MEDET (Materials Exposure and Degradation Experiment on EuTEF), which aims to measure how the hostile space environment affects materials used to construct spacecraft.

These materials, particularly polymers which are often used to form insulation blankets on spacecraft, for example, suffer damage from the combined effects of solar radiation, micrometeroid and space debris impact, and from exposure to atomic oxygen, which is the primary constituent of the Earth's residual atmosphere in low Earth orbit. STORM will monitor the concentration of atomic oxygen (AO) and the flux of solar X-ray and ultra-violet radiation.

Once operational, STORM will send back data at regular intervals so that the changes in the AO and X-ray/UV levels can be monitored over time. After two or three years of exposure to the space environment, the experiment will be returned to Earth for analysis and interpretation by the Southampton researchers, who will determine the effect of the exposure on the materials and instruments contained on board.

Design work on the instrument, which is a cube measuring approximately 15 centimetres on each side with a mass of approximately 1 kilogram, began in 2001 with funding from the Engineering and Physical Sciences Research Council.

STORM was developed by staff from three School of Engineering Sciences research groups, including Professor Stephen Gabriel from Astronautics; Dr Graham Roberts from Aerodynamics and Flight Mechanics and Dr Alan Chambers from Engineering Materials, together with Dr Neil Ross from the School of Electronics and Computer Science. Ken Lawson and Dr Jeff Rao of the School of Applied Sciences at Cranfield University were also involved in the fabrication of some of the sensors.

Most of the design and development work was carried out by two Engineering Sciences research students, Duncan Goulty and Carl White, both of whom have now been awarded their PhDs. Several undergraduate students also took part in the development of STORM by carrying out project work as part of their studies.

The MEDET experiment is part of an international project between the University of Southampton's Schools of Engineering Sciences and Electronics and Computer Science; the European Space Agency (ESA); the French Space Agency (CNES), and the French Aerospace Laboratory (ONERA).

The NASA image shows the experimental package in the shuttle's cargo bay. STORM is just visible on the lower left of the picture.MEDET is the box wrapped in a gold coloured insulation material. Our package, STORM can be seen as a small aluminium coloured rectangle sticking through the wrapping material. Just visible are four of the UV radiation detectors (small round holes) and a rectangular Xray window covering two of the four Xray detectors.

Share this article FacebookGoogle+TwitterWeibo

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×