Jump to:
Lewis, G |
Alavi, F |
Beeby, S |
Damrongsak, |
Damrongsak, B |
Ding, H |
Dong, |
Dong, Y |
Gaura, E |
Gindila, M |
Gollasch, C |
Gong, |
Gong, W |
Grubisic, A |
Haas, C |
Houliham, R |
Houlihan, R |
Jiang, L |
Kham, M |
Kiang, K |
Koukharenka, A |
Koukharenka, E |
Koukharenko , E |
Koukharenko, E |
Kraft, |
Kraft, M |
Kukharenka, A |
Kukharenka, E |
Kukharenka,, E |
Lewis, C |
Lewis, G |
Luo, J |
M, K |
Mokhtari, M |
Moktadir, Z |
Mokthari, M |
Mowlem, M |
Niblock, T |
Qiao, X |
Sari, I |
Schabmueller, C |
Sehr, H |
Sewell, R |
Shakoor, |
Stefanou, S |
Sun, D |
Taberham, |
Taberham, A |
Trupke , M |
Trupke, M |
Xuesong, J |
Zeimpekis, INumber of items: 121.
Lewis, G
Lewis, G, Moktadir, Zakaria, Kraft, Michael and Jiang, Liudi (2008) Resistivity percolation of co-sputtered amorphous Si/Ti films. Materials Letters, 63, (2), .
Alavi, F
Alavi, F N, Kraft, M and King, D O (2001) Sensitivity analysis of a high performance accelerometer. At Micromechanics Europe, Cork, Ireland, , .
Beeby, S
Beeby, Stephen, Ensell, Graham, Kraft, Michael and White, Neil (2004) MEMS Mechanical Sensors, Artech House, Inc (Microelectromechanical systems series)
Damrongsak,
Damrongsak, B, Kraft, M, Rajgopal, S and Mehregany, M (2008) Design and fabrication of a micromachined electrostatically suspended gyroscope. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNALOF MECHANICAL ENGINEERING SCIENCE, 222, .
Damrongsak, B
Damrongsak, B., Gardonio, P. and Kraft, M. (2008) MEMS velocity sensor using direct velocity feedback. At EUROSENSORS XXII, Dresden, Germany, 07 - 10 Sep 2008.
Ding, H
Ding, Haitao, Liu, X, Cui, J, Chi, X, Lin, L, Kraft, Michael, Yang, Z and Yan, G (2010) A high resolution silicon-on-glass Z Axis Gyroscope Operating at Atmospheric Pressure. IEEE Sensors Journal, 10, (6), . (Submitted)
Dong,
Dong, Y, Kraft, M, Hedenstierna, N and Redman-White, W (2008) Microgyroscope control system using a high-order band-pass continuous-time sigma-delta modulator. SENSORS AND ACTUATORS A-PHYSICAL, 145, .
Dong, Y
Dong, Yufeng, Kraft, Michael and Redman-White, William (2007) Micromachined vibratory gyroscopes controlled by a high order band-pass sigma delta modulator. IEEE Sensors Journal, 7, (1), .
Dong, Yufeng, Kraft, Michael and Redman-White, William (2006) Force feedback linearization for higher-order electromechanical sigma-delta modulators. Journal of Micromechanics and Microengineering, 16, .
Dong, Y, Kraft, M and Gollasch, C O (2005) A high performance accelerometer with fifth order sigma delta modulator. J Micromech Microeng, 15, .
Dong, Yufeng and Kraft, Michael (2004) Simulation of micromachined inertial sensors with higher-order single loop sigma-delta modulators. At Modeling and Simulation of Microsystems (MSM), Boston, USA, , .
Dong, Y, Kraft, M and Redman-White, W (2004) High order noise shaping filters for high performance inertial sensors. IEEE Transactions on Instrumentation and Measurement (submitted not accepted or published)
Dong, Yufeng, Kraft, Michael and Gollasch, Carsten (2004) A High performance accelerometer with fifth-order Sigma-Delta Modulator. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Gaura, E
Gaura, E, Kraft, M, Steele, M and Rider, R J (1999) A comparison of approaches for the design of closed-loop micromachined accelerometers. Journal System Science, 25, (4), .
Gaura, E, Kraft, M, Steele, M and Rider, R J (1999) A comparison of approaches for the design of closed-loop micromachined accelerometers. In, 13th International Conference on Systems Engineering, Las Vegas, , .
Gindila, M
Gindila, M, Kraft, M, Houlihan, R and Redman White, W (2004) Sigma-delta interface for a three axis levitated disc accelerometer. Sensors and Actuators (submitted not accepted or published)
Gindila, M.V., Kraft, M., Houlihan, R. and Redman-White, W. (2004) Solid-State Electronic Interface For A Levitated Disc Accelerometer. In, Eurosensors XVII, Rome, Italy, 13 - 15 Sep 2004. IEEE EDS.
Gindila, M.V and Kraft, Michael (2003) Electronics interface design for an electrically floating micro-disc. J Micromech Microeng, 13, .
Gindila, M.V. and Kraft, Michael (2002) Design of an electronic interface for levitated disk accelerometer. At Micro-Mechanics Europe, Sinaia, Micromechanics Europe (MME), .
Gollasch, C
Gollasch, C O, Moktadir, Zak, Koukharenko, Elena, Kraft, Michael, Bagnall, Darren, Eriksson, S, Trupke, M and Hinds, E A (2004) Integration of a two-dimensional electrostatic actuator in a new generation of atom chips. In, Eurosensors XVIII, Rome, Italy, 13 - 15 Sep 2004.
Gollasch, C O, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Trupke, M, Eriksson, S and Hinds, E A (2004) A three dimensional electrostatic actuator with a locking mechanism for microcavities on atom chips. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Gollasch, C O, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Trupke, M, Eriksson, S and Hinds, E A (2004) A three-dimensional electrostatic actuator with a locking mechanism for a new generation of atom chips. Journal of Micromachanics and Microengineering, 15, (7), .
Gong,
Gong, WD, Mowlem, M, Kraft, M and Morgan, H (2009) A Simple, Low-Cost Double Beam Spectrophotometer for Colorimetric Detection of Nitrite in Seawater. IEEE SENSORS JOURNAL, 9, .
Gong, WD, Mowlem, M, Kraft, M and Morgan, H (2008) Oceanographic Sensor for in-situ temperature and conductivity monitoring. OCEANS 2008 - MTS/IEEE KOBE TECHNO-OCEAN, VOLS 1-3, .
Gong, W
Gong, Weidong, Mowlem, Matt, Kraft, Michael and Morgan, Hywel (2009) A simple low cost double beam spectrophotometer for colorimetric detection of nitrite in seawater. IEEE Sensors Journal, 9, (7), .
Gong, Weidong, Mowlem, Matt, Kraft, Michael and Morgan, Hywel (2009) A Simple, Low-Cost Double Beam Spectrophotometer for Colorimetric Detection of Nitrite in Seawater. IEEE Sensors Journal, 9, (7), . (doi:10.1109/JSEN.2009.2020659)
Gong, Weidong, Mowlem, M., Kraft, M. and Morgan, H. (2008) Oceanographic Sensor for in-situ temperature and conductivity monitoring. In, OCEANS 2008 - MTS/IEEE Kobe Techno-Ocean. OCEANS 2008 Richardson TX, USA, MTS/IEEE.
Grubisic, A
Grubisic, Angelo N, Gabriel, Stephen B, Jiang, Liudi, Cranny, Andrew, Kraft, Michael and White, Neil (2009) On-a-chip microdischarge thruster arrays inspired by photonic device technology for plasma television.
Haas, C
Haas, Christoph H and Kraft, Michael (2004) Modelling and analysis of a MEMS approach to dc voltage step-up conversion. Journal of Micromech Microengineering, 14, No, .
Haas, Christoph and Kraft, Michael (2003) Modelling And Analysis Of A MEMS Approach To DC Voltage Step Up Conversion. In, 14th Micromechanics Europe Workshop, Delft, The , Netherlands, 02 - 04 Nov 2003. , .
Houliham, R
Houliham, Ruth and Kraft, Michael (2004) Finge Capacitance Models for MEMS Devices. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, , .
Houlihan, R
Houlihan, R and Kraft, M (2004) Modelling squeeze film effects in a MEMS accelerometer with levitated proof mass. Journal of Micromech Microeng, 15, (5), .
Houlihan, R, Koukharenko, E, Sehr, H and Kraft, M (2003) Optimisation, Design and Fabrication of a Novel Accelerometer. At IEEE International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'03), Boston, MA, USA, 08 - 12 Jun 2003. , .
Houlihan, R and Kraft, M (2002) Modelling of an accelerometer based on a levitated proof mass. Journal of Material Science: Materials in Electronics, 12, (4), .
Houlihan, R, Kukharenka, A, Gindila, M and Kraft, M (2001) Analysis and design of a capacitive accelerometer based on an electrostatically levitated microdisk. SPIE 2001 Symposium on Micromachining and Microfabrication, .
Houlihan, Ruth and Kraft, Michael (2001) Modelling of an accelerometer based on a levitated proof mass. In, Micromechanics Europe, Cork, Ireland, , .
Jiang, L
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2007) A novel method for nanoprecision alignment in wafer bonding applications. Journal of Micromechanics and Microengineering, 17, (7), . (doi:10.1088/0960-1317/17/7/S01)
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2007) Wafer bonding with nanoprecision alignment for micro/nano systems. In, Transducers & Eurosensors '07: 14th International Conference on Solid-State Sensors, Actuators and Microsystems. USA, Institute of Electrical and Electronics Engineers. (doi:10.1109/SENSOR.2007.4300580)
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.Mark and Kraft, Michael (2007) A novel method for nanoprecision alignment in wafer bonding applications. Journal of Micromechanics and Microengineering, (Special Issue: )
Jiang, Liudi, Pandraud, G, French, P J, Spearing, S M and Kraft, Michael (2007) A novel method for nanoprecision alignment in wafer bonding applications. J.Micromech Microeng, 17, (7), .
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2006) Nanoprecision alignment for wafer bonding. At 17th Workshop on Micromachining, Micromechanics and Microsystems, Southampton, UK, Sep 2006. 4pp, .
Kham, M
Kham, M N, Houlihan, Ruth and Kraft, Michael (2004) Design and Simulation of a Mechanical Amplifier for Inertial Sensing Applications. In, 6th Conference on Modelling and Simulation of Microsystems, Boston, , .
Kiang, K
Kiang, K S, Houlihan, Ruth, Gindila, M, Damrongsak, B and Kraft, Michael (2004) Design and Simulation of a spring-less micro switch. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Koukharenka, A
Koukharenka, A, Kraft, Michael, Ensell, G and Hollinshead, N (2005) A comparative study of four thick photoresists for MEMS applications. Journal Material Science:Materials in Electronics, 16, (11-12), .
Koukharenka, E
Koukharenka, Elena and Kraft, Michael (2002) Realisation of electroplating moulds with thick positive SPR220-7 photoresist. At , the 4th International Conference on Material for Microelectronics and Nanoengineering, , ESPOO, Finland, , .
Koukharenka, Elena and Kraft, Michael (2002) Realisation of electroplating moulds with thick positive SPR220-7 photoresist. At , the 4th International Conference on Material for Microelectronics and Nanoengineering, , ESPOO, Finland, , .
Koukharenko , E
Koukharenko , Elena, Kraft, M, Abdelsalam, M, Bagnall, DM, Vale, C, Jones, M and Hinds, EA (2004) Microfabrication of gold wires for atom guides. Sensors and Actuators A 115 pp. 600-607. Microfabrication of gold wires for atom guides. Sensors and Actuators A 115 pp. 600-607., A115, .
Koukharenko, E
Koukharenko, Elena, Kraft, M, Ensell, G and Hollinshead, N (2005) Comparative study of different thick photoresists for MEMS applications Journal of Materials Science: Materials in Electronics 16 pp. 741– 747. Comparative study of different thick photoresists for MEMS applications Journal of Materials Science: Materials in Electronics, 16, .
Kraft,
Kraft, M and Ding, HT (2009) Sigma-delta Modulator Based Control Systems for MEMS Gyroscopes. 2009 4TH IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS, VOLS 1 AND 2, .
Kraft, M. (2009) A new design methodology for electro-mechanical Sigma-Delta-Modulators. 2009 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2009), .
Kraft, M
Kraft, M, Redman-White, W and Mokhtari, M E (2001) Closed loop micromachined sensors wsith higher order SD-Modulators. Proceedings 4th Conference on Modeling and Simulation of Microsystems, .
Kraft, M and Gaura, E (2001) Intelligent control for a micromachined tunneling accelerometer. In, International MEMS Workshop, , .
Kraft, Michael, Farooqui, Mateen M and Evans, Alan G R (2001) Modelling and design of an electrostatically levitated disc for inertial sensing applications. Journal of Micromechanics and Microengineering, 11
Kraft, M and Evans, A G R (2000) System level simulation of an electrostatically levitated disk. , .
Kraft, M, Farooqui, M M and Evans, A G R (2000) Modelling and design of an electrostatically levitated disk. Conference on Micromechanics Europe Stockholm, Paper
Kraft, M and Lewis, C P (1998) System Level Simulation of a Digital Accelerometer.
Kraft, M, Lewis, C P and Hesketh, T G (1998) Closed Loop Silicon Accelerometers. , (5), .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1998) A Novel Micromachined Accelerometer Capacitive Interface. Snesors & Actuators, A68/1-, .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1998) A novel micromachined accelerometer capacitive interface. Sensors & Actuators, A 68, .
Kraft, M and Lewis, C P (1997) A Generic Approach to Closed Loop, Digital Transducers. , .
Kraft, M, Lewis, C P and Hesketh, T G (1997) Control System Design Study for a Micromachined Accelerometer. , .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1997) A Novel Micromachined Accelerometer Capacitive Interface. 2, .
Kraft, M, Lewis, C P and Hesketh, T G (1996) Characterisation and Modelling of a Digital Micromachined Accelerometer Int Conf on System Eng. , .
Kraft, M, Lewis, C P and Hesketh, T G (1996) Development of a Digital Accelerometer for Low-frequency Structural Vibration Measurement.Proc.MTEC.
Kraft, M, Lewis, C P, Hesketh, T G and Tulmann, J (1996) Signal Pick-off in Micromachined Accelerometers. , .
Kukharenka, A
Kukharenka, A, Farooqui, M, Grigore, Luminita, Kraft, Michael and Hollinshead, N (2003) Electroplating moulds using dry film thick negative photoresist. Micromech Microeng, 13, .
Kukharenka, E
Kukharenka, Elena, Moktadir, Zak, Kraft, Michael, Abdelsalam, M E, Bagnall, Darren, Vale, C, Jones, M P A and Hinds, E A (2004) Microfabrication of gold wires for atom guides. Sensors and Actuator, A, 115, .
Kukharenka, E, Kraft, M and Hollinshead, N (2004) Realisation of electroplating moulds with different thick photoresists for MEMS applications. At Eurosensors XIV Conference, Prague, Czech Republic, 15 - 18 Sep 2002. , .
Kukharenka, Elena, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Vale, C, Jones, M and Hinds, E (2003) Microfabrication of gold wires for atom guies. Proceedings Eurosensors XVII Conference, .
Kukharenka, E and Kraft, M (2003) Realisation of electroplating moulds with thick positive SPR220-7 photoresist, Journal of Materials science: Materials in Electronics 14 (2003), pp. 319-322. Journal of Materials science: Materials in Electronics, 14, .
Kukharenka, E, Farooqui, M M, Grigore, L and Kraft, M (2002) Electroplating moulds using dry film thick negative photoresist. At MME, Sinaia, Romania, 06 - 08 Oct 2002. , .
Kukharenka,, E
Kukharenka,, E and Kraft, M (2002) Realisation of electroplating moulds with different thick photoresists for MEMS applications, Eurosensors XIV Conference, September 15-18, Prague, Czech Republic, 2002, pp. 103-104. At Eurosensors XIV Conference, Prague, Czech Republic, 15 - 18 Sep 2002. , .
Lewis, C
Lewis, C P, Hesketh, T G, Kraft, M and Florescu, M (1998) A Digital Pressure Transducer. Trans. Inst. of Meas. and Control, 20, .
Lewis, C P, Hesketh, T G and Kraft, M (1996) An Electric Current Transducer for Industrial Use. , .
Lewis, C P, Hesketh, T G and Kraft, M (1996) A Low Cost Electric Current Transducer for Industrial Use. , .
Lewis, C P and Kraft, M (1996) Simulation of a Micromachined Digital Accelerometer in SIMULINK and PSPICE. Int Conf on Control, 1, .
Lewis, C P, Kraft, M and Hesketh, T G (1996) Mathematical Model for a Micromachined Accelerometer. Trans. Inst. of Meas. and Control, 18, (2), .
Lewis, C P, Kraft, M and Hesketh, T G (1995) Design and Development of a Digital Transducer. In, AEROTECH, Birmingham,
Lewis, C P, Kraft, M and Hesketh, T G (1995) Developments in Digital Transducers for Vehicle Control and Telemetric Instrumentation. In, 2nd IFAC Conference on Intelligent Auton. Vehicles, Helsinki, , .
Lewis, C P, Kraft, M and Hesketh, T G (1995) A Micromachined, Digital, Closed-loop Accelerometer. UNSPECIFIED , .
Lewis, C P, Kraft, M and Hesketh, T G (1994) The Development of a Digital Accelerometer. In, 27th ISATA, Aachen, , .
Lewis, G
Lewis, G., Moktadir, Z., Kraft, M and Jiang, Liudi (2009) Resistivity percolation of co-sputtered amorphous Si/Ti films. Materials Letters, 63, (2), . (doi:10.1016/j.matlet.2008.09.061)
Lewis, Gareth Neil, Moktadir, Zakaria, Gollasch, C., Kraft, Michael, Pollock, Samuel, Ramirez-Martinez, Fernando, Ashmore, J. P., Laliotis, A., Trupke, M. and Hinds, Edward A. (2009) Fabrication of Magnetooptical Atom Traps on a Chip. IEEE Journal of Micro-Electro-Mechanical Systems, 18, (2), .
Luo, J
Luo, Jian, Rapisarda, Paolo and Kraft, Michael (2010) Dynamics-level Design for Discrete- and Continuous-Time Band-pass Sigma-Delta-Modulators for Micro-machined Accelerometers. In, MTNS 2010, Budapest, Hungary, 05 - 09 Jul 2010.
M, K
M, Kraft (2000) Micromachined inertial sensors. The state of the art and a look into the future. IMC Measurement and Control, 33, (6), .
Mokhtari, M
Mokhtari, M E and Kraft, Michael (2003) Advanced control systemns for MEMS capacitive sensing accelerometers. Proceedings Micromechanics Europe (MME), .
Mokhtari, M and Kraft, M (2003) Advanced control systems for MEMS capacitive sensing accelerometers. At 14th MicroMechanics Europe Workshop, Delft, The , Netherlands, 04 - 02 Nov 2003. , .
Moktadir, Z
Moktadir, Zakaria, Kraft, Michael and Winsink, Henk (2008) Multifractal properties of Pyrex and silicon surfaces blasted with sharp particles. Physica A: Statistical Mechanics and its Applications, 387, .
Moktadir, Z, Darquie, B, Kraft, M and Hinds, E. A. (2007) The effect of self-affine fractal roughness of wires on atom chips. Journal of Modern Optics, (54:13), .
Moktadir, Zak and Kraft, Michael (2005) Analytical model of micromachining of brittle materials with sharp particles. Microelectronics Journal, 36, (3-6), .
Moktadir, Zak and Kraft, Michael (2005) Wavelet analysis of coarsening during unstable MBE growth. Microelectronics Journal, 36, (Issues), .
Moktadir, Zak, Kukharenka, Alena, Kraft, Michael, Bagnall, Darren, Jones, M, Powell, M and Hinds, E (2004) Etching techniques for the realisation of optical micro-cavities on silicon for atom traps. Journal of Miromechanical Microengineering, 14, (9), .
Moktadir, Zak, Prakash, G V, Koukharenko, Elena, Gollasch, C, Bagnall, Darren, Kraft, Michael, Hinds, E and Baumberg, Jeremy (2004) Fabrication of miromirrors with pyramidal shape using anisotropic etching of silicon with KOH. In, Proceedings CLEO/IQEC 2004, San Francisco, California, USA,
Moktadir, Z, Koukharenko, E, Kraft, M, Bagnall, D M, Jones, M, Powell, H and Hinds, E (2003) Etching Techniques for the realisation optical micro-cavities on silicon for atom traps. At 14th MicroMechanics Europe Workshop, Delft, The , Netherlands, 04 - 02 Nov 2003. , .
Mokthari, M
Mokthari, M E and Kraft, Michael (2004) Advanced Control Systems for MEMS capacitive sensing accelerometers, Micromechanical Microengineering
Mowlem, M
Mowlem, M, Holmes, David, Benazzi, Giuseppe, Morgan, Hywel, Kraft, Michael, Taberham, Alan, Chavagnac, V, Hass, C, Statham, P and Burkhill, P (2006) Micro system technology for marine measurement. In, Oceans'06 MTS/IEEE-Boston,, Boston, Massachusetts,
Mowlem, M., Benazzi, G., Holmes, D., Morgan, H., Haas, C., Kraft, M., Taberham, A., Chavagnac, V., Statham, P.J. and Burkill, P. (2006) Micro system technology for marine measurement. In, Proceedings of IEEE/MTS Oceans'06 Conference, Boston MA, September 18-21, 2006. Oceans'06 Conference Piscataway NJ, USA, IEEE.
Niblock, T
Niblock, T, Kraft, M and Sehr, H (2001) Design criteria for a hybrid nano/photolithography system. , .
Qiao, X
Qiao, Xiao Guang, Bah, Mamadou T., Zhang, Jiuwen, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Microembossing of ultrafine grained Al: microstructural analysis and finite element modelling. Journal of Micromechanics and Microengineering, 20, (10), . (doi:10.1088/0960-1317/20/10/105002)
Qiao, Xiaoguang, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Fabrication of MEMS components using ultrafine-grained aluminium alloys. Journal of Micromechanics and Microengineering, 20, (4), . (http://dx.doi.org/10.1088/0960-1317/20/4/045029)
Qiao, X, Gao, N, Moktadir, Zakaria, Michael, Kraft and Starvink, M J (2010) Fabrication of MEMS components using ultra fine grained aluminium. J. Micromech.Microeng, 20, (4), . (Submitted)
Sari, I
Sari, Ibrahim, Zeimpekis, Ioannis and Kraft, Michael (2012) A dicing free SOI process for MEMS devices. Microelectronic Engineering, 95, . (doi:10.1016/j.mee.2012.02.004)
Schabmueller, C
Schabmueller, C G J, Koch, M, Kraft, M, Evans, A G R and Brunnschweiler, A (2000) Design and Fabrication of a Self-Aligning Gas/Liquid Micropump. , .
Sehr, H
Sehr, H, Evans, A G R, Brunnschweiler, A and Kraft, M (2000) Theoretical Analyses on a Novel Actuator Based on Thermally Actuated Vertical Bimorphs. , .
Sehr, H, Evans, A G R, Brunnschweiler, A, Ensell, G J and Kraft, M (2000) A 3-Dimenstional Actuator Based on A novel combination of Thermally actuated Planar and Vertical Bimorphs. , .
Sehr, H, Evans, A G R, Brunnschweiler, A and Kraft, M (2000) Design and Fabrication of a Novel Thermally Actuated Vertical Bimorph Scanner for an Integrated AFM DTIP, 2000.
Sewell, R
Sewell, R J, Dingjan, J, Baumgärtner, F, Llorente-García, I, Eriksson, S, Hinds, E A, Lewis, G, Srinivasan, P, Moktadir, Z, Gollasch, C O and Kraft, M. (2010) Atom chip for BEC interferometry. J. Phys. B: At. Mol. Opt. Phys, 43, .
Shakoor,
Shakoor, RI, Bazaz, SA, Kraft, M, Lai, YJ and ul Hassan, MM (2009) Thermal Actuation Based 3-DoF Non-Resonant Microgyroscope Using MetalMUMPs. SENSORS, 9, .
Stefanou, S
Stefanou, S, Hamel, J, Baine, P, Armstrong, M, Gamble, H, Kraft, M and Kemhadjian, H A (2004) Ultra low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on electron Devices, 51 No., .
Stefanou, Stefanos, Hamel, John, Baine, P, Baine, M, Armstrong, B M, Gamble, H S, Kraft, Michael and Kemhadjian, Henri (2004) Ultra low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on Electron Devices, 51, .
Stefanou, Stefanos, Hamel, John, Bain, J S, Armstrong, M, Gamble, B M, Kraft, Michael and Kemhadjian, Henri (2003) Ultra Low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on Electron Devices
Sun, D
Sun, D, Dong, W, Liu, C, Wang, G, Chen, W and Kraft, Michael (2007) Characteristic analysis on dynamic response of a micro-actuator. Journal of Microsystem Technologies, 13, (1)
Sun, D M, Dong, W, Guo, W B, Liu, C X, Wang, G D, Yan, X, Xu, B K, Chen, W Y and Kraft, M (2004) Study on actuating voltage and switching time of a MOEMS optical switch. Journal of Optics and Laser Technology (Accepted not published)
Taberham,
Taberham, A.., Kraft, M., Mowlem , M. and Morgan, H. (2008) Fabrication of Lab-on-Chip devices from Fluoropolymers. J Micromech. Microeng., 18, (6), .
Taberham, A
Taberham, A., Kraft, M., Mowlem, M. and Morgan, H. (2008) The fabrication of lab-on-chip devices from fluoropolymers. Journal of Micromechanics and Microengineering, 18, (6), . (doi:10.1088/0960-1317/18/6/064011)
Taberham, Alan, Mowlem, M, Kraft, Michael and Morgan, Hywel (2007) Fabrication of Lab on Chip devices from fluoropolymers. In, Proc. Micromechanics Europe, Guimaraes, Portugal,
Trupke , M
Trupke , M, Hinds, E A, Eriksson, S, Moktadir, Z, Kukharenka, E and Kraft, M (2005) Microfabricated high-finesse optical cavity with open access and small volume, Applied Physics Letters 87, pp. 211106. Microfabricated high-finesse optical cavity with open access and small volume, Applied Physics Letters, 87, .
Trupke, M
Trupke, M., Ramirez-Martinez, F., Curtis, E., Ashmore, J.P., Erikkson, S., Hinds, E., Moktadir, Z., Gollasch, C., Kraft, M., Vijaya Prakash, G. and Baumberg, J.J. (2006) Pyramidal micromirrors for microsystems and atom chips. Applied Physics Letters, 88, . (doi:10.1063/1.2172412)
Trupke, M, Ramirez-Martinez, F, Curtis, E.A, Ashmore, J P, Eriksson, S, Hinds, E A, Moktadir, Z, Gollasch, C, Kraft, M, Vijaya Prakash, G and Baumberg, JJ (2006) Pyramidal micromirrors for microsystems and atom chips. Applied Physics Letters, 88, (071116)
Xuesong, J
Xuesong, J, Seeger, J I, Kraft, M and Boser, B E (2000) A Monolithic surface micromachined Z-axis gyroscope with digital output. Symposium on VLSI Circuits, .
Zeimpekis, I
Zeimpekis, Ioannis, Sari, Ibrahim and Kraft, Michael (2012) Characterization of a mechanical motion amplifier applied to a MEMS accelerometer. Journal of Microelectromechanical Systems, . (doi:10.1109/JMEMS.2012.2196491) (In Press)
This list was generated on Tue May 22 15:56:11 2012 BST.
