Number of items: 121.
Article
Sari, Ibrahim, Zeimpekis, Ioannis and Kraft, Michael (2012) A dicing free SOI process for MEMS devices. Microelectronic Engineering, 95, . (doi:10.1016/j.mee.2012.02.004)
Zeimpekis, Ioannis, Sari, Ibrahim and Kraft, Michael (2012) Characterization of a mechanical motion amplifier applied to a MEMS accelerometer. Journal of Microelectromechanical Systems, . (doi:10.1109/JMEMS.2012.2196491) (In Press)
Qiao, Xiao Guang, Bah, Mamadou T., Zhang, Jiuwen, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Microembossing of ultrafine grained Al: microstructural analysis and finite element modelling. Journal of Micromechanics and Microengineering, 20, (10), . (doi:10.1088/0960-1317/20/10/105002)
Ding, Haitao, Liu, X, Cui, J, Chi, X, Lin, L, Kraft, Michael, Yang, Z and Yan, G (2010) A high resolution silicon-on-glass Z Axis Gyroscope Operating at Atmospheric Pressure. IEEE Sensors Journal, 10, (6), . (Submitted)
Qiao, Xiaoguang, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Fabrication of MEMS components using ultrafine-grained aluminium alloys. Journal of Micromechanics and Microengineering, 20, (4), . (http://dx.doi.org/10.1088/0960-1317/20/4/045029)
Qiao, X, Gao, N, Moktadir, Zakaria, Michael, Kraft and Starvink, M J (2010) Fabrication of MEMS components using ultra fine grained aluminium. J. Micromech.Microeng, 20, (4), . (Submitted)
Sewell, R J, Dingjan, J, Baumgärtner, F, Llorente-García, I, Eriksson, S, Hinds, E A, Lewis, G, Srinivasan, P, Moktadir, Z, Gollasch, C O and Kraft, M. (2010) Atom chip for BEC interferometry. J. Phys. B: At. Mol. Opt. Phys, 43, .
Gong, Weidong, Mowlem, Matt, Kraft, Michael and Morgan, Hywel (2009) A simple low cost double beam spectrophotometer for colorimetric detection of nitrite in seawater. IEEE Sensors Journal, 9, (7), .
Gong, Weidong, Mowlem, Matt, Kraft, Michael and Morgan, Hywel (2009) A Simple, Low-Cost Double Beam Spectrophotometer for Colorimetric Detection of Nitrite in Seawater. IEEE Sensors Journal, 9, (7), . (doi:10.1109/JSEN.2009.2020659)
Lewis, G., Moktadir, Z., Kraft, M and Jiang, Liudi (2009) Resistivity percolation of co-sputtered amorphous Si/Ti films. Materials Letters, 63, (2), . (doi:10.1016/j.matlet.2008.09.061)
Gong, WD, Mowlem, M, Kraft, M and Morgan, H (2009) A Simple, Low-Cost Double Beam Spectrophotometer for Colorimetric Detection of Nitrite in Seawater. IEEE SENSORS JOURNAL, 9, .
Kraft, M and Ding, HT (2009) Sigma-delta Modulator Based Control Systems for MEMS Gyroscopes. 2009 4TH IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS, VOLS 1 AND 2, .
Kraft, M. (2009) A new design methodology for electro-mechanical Sigma-Delta-Modulators. 2009 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2009), .
Lewis, Gareth Neil, Moktadir, Zakaria, Gollasch, C., Kraft, Michael, Pollock, Samuel, Ramirez-Martinez, Fernando, Ashmore, J. P., Laliotis, A., Trupke, M. and Hinds, Edward A. (2009) Fabrication of Magnetooptical Atom Traps on a Chip. IEEE Journal of Micro-Electro-Mechanical Systems, 18, (2), .
Shakoor, RI, Bazaz, SA, Kraft, M, Lai, YJ and ul Hassan, MM (2009) Thermal Actuation Based 3-DoF Non-Resonant Microgyroscope Using MetalMUMPs. SENSORS, 9, .
Lewis, G, Moktadir, Zakaria, Kraft, Michael and Jiang, Liudi (2008) Resistivity percolation of co-sputtered amorphous Si/Ti films. Materials Letters, 63, (2), .
Damrongsak, B, Kraft, M, Rajgopal, S and Mehregany, M (2008) Design and fabrication of a micromachined electrostatically suspended gyroscope. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNALOF MECHANICAL ENGINEERING SCIENCE, 222, .
Dong, Y, Kraft, M, Hedenstierna, N and Redman-White, W (2008) Microgyroscope control system using a high-order band-pass continuous-time sigma-delta modulator. SENSORS AND ACTUATORS A-PHYSICAL, 145, .
Gong, WD, Mowlem, M, Kraft, M and Morgan, H (2008) Oceanographic Sensor for in-situ temperature and conductivity monitoring. OCEANS 2008 - MTS/IEEE KOBE TECHNO-OCEAN, VOLS 1-3, .
Moktadir, Zakaria, Kraft, Michael and Winsink, Henk (2008) Multifractal properties of Pyrex and silicon surfaces blasted with sharp particles. Physica A: Statistical Mechanics and its Applications, 387, .
Taberham, A.., Kraft, M., Mowlem , M. and Morgan, H. (2008) Fabrication of Lab-on-Chip devices from Fluoropolymers. J Micromech. Microeng., 18, (6), .
Taberham, A., Kraft, M., Mowlem, M. and Morgan, H. (2008) The fabrication of lab-on-chip devices from fluoropolymers. Journal of Micromechanics and Microengineering, 18, (6), . (doi:10.1088/0960-1317/18/6/064011)
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2007) A novel method for nanoprecision alignment in wafer bonding applications. Journal of Micromechanics and Microengineering, 17, (7), . (doi:10.1088/0960-1317/17/7/S01)
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.Mark and Kraft, Michael (2007) A novel method for nanoprecision alignment in wafer bonding applications. Journal of Micromechanics and Microengineering, (Special Issue: )
Dong, Yufeng, Kraft, Michael and Redman-White, William (2007) Micromachined vibratory gyroscopes controlled by a high order band-pass sigma delta modulator. IEEE Sensors Journal, 7, (1), .
Jiang, Liudi, Pandraud, G, French, P J, Spearing, S M and Kraft, Michael (2007) A novel method for nanoprecision alignment in wafer bonding applications. J.Micromech Microeng, 17, (7), .
Moktadir, Z, Darquie, B, Kraft, M and Hinds, E. A. (2007) The effect of self-affine fractal roughness of wires on atom chips. Journal of Modern Optics, (54:13), .
Sun, D, Dong, W, Liu, C, Wang, G, Chen, W and Kraft, Michael (2007) Characteristic analysis on dynamic response of a micro-actuator. Journal of Microsystem Technologies, 13, (1)
Trupke, M., Ramirez-Martinez, F., Curtis, E., Ashmore, J.P., Erikkson, S., Hinds, E., Moktadir, Z., Gollasch, C., Kraft, M., Vijaya Prakash, G. and Baumberg, J.J. (2006) Pyramidal micromirrors for microsystems and atom chips. Applied Physics Letters, 88, . (doi:10.1063/1.2172412)
Dong, Yufeng, Kraft, Michael and Redman-White, William (2006) Force feedback linearization for higher-order electromechanical sigma-delta modulators. Journal of Micromechanics and Microengineering, 16, .
Trupke, M, Ramirez-Martinez, F, Curtis, E.A, Ashmore, J P, Eriksson, S, Hinds, E A, Moktadir, Z, Gollasch, C, Kraft, M, Vijaya Prakash, G and Baumberg, JJ (2006) Pyramidal micromirrors for microsystems and atom chips. Applied Physics Letters, 88, (071116)
Moktadir, Zak and Kraft, Michael (2005) Analytical model of micromachining of brittle materials with sharp particles. Microelectronics Journal, 36, (3-6), .
Moktadir, Zak and Kraft, Michael (2005) Wavelet analysis of coarsening during unstable MBE growth. Microelectronics Journal, 36, (Issues), .
Dong, Y, Kraft, M and Gollasch, C O (2005) A high performance accelerometer with fifth order sigma delta modulator. J Micromech Microeng, 15, .
Koukharenka, A, Kraft, Michael, Ensell, G and Hollinshead, N (2005) A comparative study of four thick photoresists for MEMS applications. Journal Material Science:Materials in Electronics, 16, (11-12), .
Koukharenko, Elena, Kraft, M, Ensell, G and Hollinshead, N (2005) Comparative study of different thick photoresists for MEMS applications Journal of Materials Science: Materials in Electronics 16 pp. 741– 747. Comparative study of different thick photoresists for MEMS applications Journal of Materials Science: Materials in Electronics, 16, .
Trupke , M, Hinds, E A, Eriksson, S, Moktadir, Z, Kukharenka, E and Kraft, M (2005) Microfabricated high-finesse optical cavity with open access and small volume, Applied Physics Letters 87, pp. 211106. Microfabricated high-finesse optical cavity with open access and small volume, Applied Physics Letters, 87, .
Haas, Christoph H and Kraft, Michael (2004) Modelling and analysis of a MEMS approach to dc voltage step-up conversion. Journal of Micromech Microengineering, 14, No, .
Kukharenka, Elena, Moktadir, Zak, Kraft, Michael, Abdelsalam, M E, Bagnall, Darren, Vale, C, Jones, M P A and Hinds, E A (2004) Microfabrication of gold wires for atom guides. Sensors and Actuator, A, 115, .
Stefanou, S, Hamel, J, Baine, P, Armstrong, M, Gamble, H, Kraft, M and Kemhadjian, H A (2004) Ultra low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on electron Devices, 51 No., .
Stefanou, Stefanos, Hamel, John, Baine, P, Baine, M, Armstrong, B M, Gamble, H S, Kraft, Michael and Kemhadjian, Henri (2004) Ultra low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on Electron Devices, 51, .
Dong, Y, Kraft, M and Redman-White, W (2004) High order noise shaping filters for high performance inertial sensors. IEEE Transactions on Instrumentation and Measurement (submitted not accepted or published)
Gindila, M, Kraft, M, Houlihan, R and Redman White, W (2004) Sigma-delta interface for a three axis levitated disc accelerometer. Sensors and Actuators (submitted not accepted or published)
Gollasch, C O, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Trupke, M, Eriksson, S and Hinds, E A (2004) A three-dimensional electrostatic actuator with a locking mechanism for a new generation of atom chips. Journal of Micromachanics and Microengineering, 15, (7), .
Houlihan, R and Kraft, M (2004) Modelling squeeze film effects in a MEMS accelerometer with levitated proof mass. Journal of Micromech Microeng, 15, (5), .
Koukharenko , Elena, Kraft, M, Abdelsalam, M, Bagnall, DM, Vale, C, Jones, M and Hinds, EA (2004) Microfabrication of gold wires for atom guides. Sensors and Actuators A 115 pp. 600-607. Microfabrication of gold wires for atom guides. Sensors and Actuators A 115 pp. 600-607., A115, .
Moktadir, Zak, Kukharenka, Alena, Kraft, Michael, Bagnall, Darren, Jones, M, Powell, M and Hinds, E (2004) Etching techniques for the realisation of optical micro-cavities on silicon for atom traps. Journal of Miromechanical Microengineering, 14, (9), .
Sun, D M, Dong, W, Guo, W B, Liu, C X, Wang, G D, Yan, X, Xu, B K, Chen, W Y and Kraft, M (2004) Study on actuating voltage and switching time of a MOEMS optical switch. Journal of Optics and Laser Technology (Accepted not published)
Mokhtari, M E and Kraft, Michael (2003) Advanced control systemns for MEMS capacitive sensing accelerometers. Proceedings Micromechanics Europe (MME), .
Kukharenka, Elena, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Vale, C, Jones, M and Hinds, E (2003) Microfabrication of gold wires for atom guies. Proceedings Eurosensors XVII Conference, .
Gindila, M.V and Kraft, Michael (2003) Electronics interface design for an electrically floating micro-disc. J Micromech Microeng, 13, .
Kukharenka, A, Farooqui, M, Grigore, Luminita, Kraft, Michael and Hollinshead, N (2003) Electroplating moulds using dry film thick negative photoresist. Micromech Microeng, 13, .
Kukharenka, E and Kraft, M (2003) Realisation of electroplating moulds with thick positive SPR220-7 photoresist, Journal of Materials science: Materials in Electronics 14 (2003), pp. 319-322. Journal of Materials science: Materials in Electronics, 14, .
Stefanou, Stefanos, Hamel, John, Bain, J S, Armstrong, M, Gamble, B M, Kraft, Michael and Kemhadjian, Henri (2003) Ultra Low silicon substrate noise crosstalk using metal Faraday cages in a silicon-on-insulator technology. IEEE Transactions on Electron Devices
Houlihan, R and Kraft, M (2002) Modelling of an accelerometer based on a levitated proof mass. Journal of Material Science: Materials in Electronics, 12, (4), .
Kraft, M, Redman-White, W and Mokhtari, M E (2001) Closed loop micromachined sensors wsith higher order SD-Modulators. Proceedings 4th Conference on Modeling and Simulation of Microsystems, .
Houlihan, R, Kukharenka, A, Gindila, M and Kraft, M (2001) Analysis and design of a capacitive accelerometer based on an electrostatically levitated microdisk. SPIE 2001 Symposium on Micromachining and Microfabrication, .
Kraft, Michael, Farooqui, Mateen M and Evans, Alan G R (2001) Modelling and design of an electrostatically levitated disc for inertial sensing applications. Journal of Micromechanics and Microengineering, 11
Xuesong, J, Seeger, J I, Kraft, M and Boser, B E (2000) A Monolithic surface micromachined Z-axis gyroscope with digital output. Symposium on VLSI Circuits, .
Kraft, M, Farooqui, M M and Evans, A G R (2000) Modelling and design of an electrostatically levitated disk. Conference on Micromechanics Europe Stockholm, Paper
Gaura, E, Kraft, M, Steele, M and Rider, R J (1999) A comparison of approaches for the design of closed-loop micromachined accelerometers. Journal System Science, 25, (4), .
Book
Beeby, Stephen, Ensell, Graham, Kraft, Michael and White, Neil (2004) MEMS Mechanical Sensors, Artech House, Inc (Microelectromechanical systems series)
Mokthari, M E and Kraft, Michael (2004) Advanced Control Systems for MEMS capacitive sensing accelerometers, Micromechanical Microengineering
Book Section
Gong, Weidong, Mowlem, M., Kraft, M. and Morgan, H. (2008) Oceanographic Sensor for in-situ temperature and conductivity monitoring. In, OCEANS 2008 - MTS/IEEE Kobe Techno-Ocean. OCEANS 2008 Richardson TX, USA, MTS/IEEE.
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2007) Wafer bonding with nanoprecision alignment for micro/nano systems. In, Transducers & Eurosensors '07: 14th International Conference on Solid-State Sensors, Actuators and Microsystems. USA, Institute of Electrical and Electronics Engineers. (doi:10.1109/SENSOR.2007.4300580)
Mowlem, M., Benazzi, G., Holmes, D., Morgan, H., Haas, C., Kraft, M., Taberham, A., Chavagnac, V., Statham, P.J. and Burkill, P. (2006) Micro system technology for marine measurement. In, Proceedings of IEEE/MTS Oceans'06 Conference, Boston MA, September 18-21, 2006. Oceans'06 Conference Piscataway NJ, USA, IEEE.
Conference or Workshop Item
Luo, Jian, Rapisarda, Paolo and Kraft, Michael (2010) Dynamics-level Design for Discrete- and Continuous-Time Band-pass Sigma-Delta-Modulators for Micro-machined Accelerometers. In, MTNS 2010, Budapest, Hungary, 05 - 09 Jul 2010.
Damrongsak, B., Gardonio, P. and Kraft, M. (2008) MEMS velocity sensor using direct velocity feedback. At EUROSENSORS XXII, Dresden, Germany, 07 - 10 Sep 2008.
Taberham, Alan, Mowlem, M, Kraft, Michael and Morgan, Hywel (2007) Fabrication of Lab on Chip devices from fluoropolymers. In, Proc. Micromechanics Europe, Guimaraes, Portugal,
Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2006) Nanoprecision alignment for wafer bonding. At 17th Workshop on Micromachining, Micromechanics and Microsystems, Southampton, UK, Sep 2006. 4pp, .
Mowlem, M, Holmes, David, Benazzi, Giuseppe, Morgan, Hywel, Kraft, Michael, Taberham, Alan, Chavagnac, V, Hass, C, Statham, P and Burkhill, P (2006) Micro system technology for marine measurement. In, Oceans'06 MTS/IEEE-Boston,, Boston, Massachusetts,
Dong, Yufeng and Kraft, Michael (2004) Simulation of micromachined inertial sensors with higher-order single loop sigma-delta modulators. At Modeling and Simulation of Microsystems (MSM), Boston, USA, , .
Kham, M N, Houlihan, Ruth and Kraft, Michael (2004) Design and Simulation of a Mechanical Amplifier for Inertial Sensing Applications. In, 6th Conference on Modelling and Simulation of Microsystems, Boston, , .
Dong, Yufeng, Kraft, Michael and Gollasch, Carsten (2004) A High performance accelerometer with fifth-order Sigma-Delta Modulator. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Gindila, M.V., Kraft, M., Houlihan, R. and Redman-White, W. (2004) Solid-State Electronic Interface For A Levitated Disc Accelerometer. In, Eurosensors XVII, Rome, Italy, 13 - 15 Sep 2004. IEEE EDS.
Gollasch, C O, Moktadir, Zak, Koukharenko, Elena, Kraft, Michael, Bagnall, Darren, Eriksson, S, Trupke, M and Hinds, E A (2004) Integration of a two-dimensional electrostatic actuator in a new generation of atom chips. In, Eurosensors XVIII, Rome, Italy, 13 - 15 Sep 2004.
Gollasch, C O, Moktadir, Zak, Kraft, Michael, Bagnall, Darren, Trupke, M, Eriksson, S and Hinds, E A (2004) A three dimensional electrostatic actuator with a locking mechanism for microcavities on atom chips. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Houliham, Ruth and Kraft, Michael (2004) Finge Capacitance Models for MEMS Devices. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, , .
Kiang, K S, Houlihan, Ruth, Gindila, M, Damrongsak, B and Kraft, Michael (2004) Design and Simulation of a spring-less micro switch. In, 15th MicroMechanics Europe Workshop, Leuven , Belgium, 05 - 07 Sep 2004. , .
Kukharenka, E, Kraft, M and Hollinshead, N (2004) Realisation of electroplating moulds with different thick photoresists for MEMS applications. At Eurosensors XIV Conference, Prague, Czech Republic, 15 - 18 Sep 2002. , .
Moktadir, Zak, Prakash, G V, Koukharenko, Elena, Gollasch, C, Bagnall, Darren, Kraft, Michael, Hinds, E and Baumberg, Jeremy (2004) Fabrication of miromirrors with pyramidal shape using anisotropic etching of silicon with KOH. In, Proceedings CLEO/IQEC 2004, San Francisco, California, USA,
Haas, Christoph and Kraft, Michael (2003) Modelling And Analysis Of A MEMS Approach To DC Voltage Step Up Conversion. In, 14th Micromechanics Europe Workshop, Delft, The , Netherlands, 02 - 04 Nov 2003. , .
Houlihan, R, Koukharenko, E, Sehr, H and Kraft, M (2003) Optimisation, Design and Fabrication of a Novel Accelerometer. At IEEE International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'03), Boston, MA, USA, 08 - 12 Jun 2003. , .
Mokhtari, M and Kraft, M (2003) Advanced control systems for MEMS capacitive sensing accelerometers. At 14th MicroMechanics Europe Workshop, Delft, The , Netherlands, 04 - 02 Nov 2003. , .
Moktadir, Z, Koukharenko, E, Kraft, M, Bagnall, D M, Jones, M, Powell, H and Hinds, E (2003) Etching Techniques for the realisation optical micro-cavities on silicon for atom traps. At 14th MicroMechanics Europe Workshop, Delft, The , Netherlands, 04 - 02 Nov 2003. , .
Kukharenka,, E and Kraft, M (2002) Realisation of electroplating moulds with different thick photoresists for MEMS applications, Eurosensors XIV Conference, September 15-18, Prague, Czech Republic, 2002, pp. 103-104. At Eurosensors XIV Conference, Prague, Czech Republic, 15 - 18 Sep 2002. , .
Gindila, M.V. and Kraft, Michael (2002) Design of an electronic interface for levitated disk accelerometer. At Micro-Mechanics Europe, Sinaia, Micromechanics Europe (MME), .
Koukharenka, Elena and Kraft, Michael (2002) Realisation of electroplating moulds with thick positive SPR220-7 photoresist. At , the 4th International Conference on Material for Microelectronics and Nanoengineering, , ESPOO, Finland, , .
Koukharenka, Elena and Kraft, Michael (2002) Realisation of electroplating moulds with thick positive SPR220-7 photoresist. At , the 4th International Conference on Material for Microelectronics and Nanoengineering, , ESPOO, Finland, , .
Kukharenka, E, Farooqui, M M, Grigore, L and Kraft, M (2002) Electroplating moulds using dry film thick negative photoresist. At MME, Sinaia, Romania, 06 - 08 Oct 2002. , .
Alavi, F N, Kraft, M and King, D O (2001) Sensitivity analysis of a high performance accelerometer. At Micromechanics Europe, Cork, Ireland, , .
Houlihan, Ruth and Kraft, Michael (2001) Modelling of an accelerometer based on a levitated proof mass. In, Micromechanics Europe, Cork, Ireland, , .
Kraft, M and Gaura, E (2001) Intelligent control for a micromachined tunneling accelerometer. In, International MEMS Workshop, , .
Gaura, E, Kraft, M, Steele, M and Rider, R J (1999) A comparison of approaches for the design of closed-loop micromachined accelerometers. In, 13th International Conference on Systems Engineering, Las Vegas, , .
Lewis, C P, Kraft, M and Hesketh, T G (1995) Design and Development of a Digital Transducer. In, AEROTECH, Birmingham,
Lewis, C P, Kraft, M and Hesketh, T G (1995) Developments in Digital Transducers for Vehicle Control and Telemetric Instrumentation. In, 2nd IFAC Conference on Intelligent Auton. Vehicles, Helsinki, , .
Lewis, C P, Kraft, M and Hesketh, T G (1995) A Micromachined, Digital, Closed-loop Accelerometer. UNSPECIFIED , .
Lewis, C P, Kraft, M and Hesketh, T G (1994) The Development of a Digital Accelerometer. In, 27th ISATA, Aachen, , .
Monograph
Grubisic, Angelo N, Gabriel, Stephen B, Jiang, Liudi, Cranny, Andrew, Kraft, Michael and White, Neil (2009) On-a-chip microdischarge thruster arrays inspired by photonic device technology for plasma television.
Other
Niblock, T, Kraft, M and Sehr, H (2001) Design criteria for a hybrid nano/photolithography system. , .
Schabmueller, C G J, Koch, M, Kraft, M, Evans, A G R and Brunnschweiler, A (2000) Design and Fabrication of a Self-Aligning Gas/Liquid Micropump. , .
Sehr, H, Evans, A G R, Brunnschweiler, A and Kraft, M (2000) Theoretical Analyses on a Novel Actuator Based on Thermally Actuated Vertical Bimorphs. , .
Sehr, H, Evans, A G R, Brunnschweiler, A, Ensell, G J and Kraft, M (2000) A 3-Dimenstional Actuator Based on A novel combination of Thermally actuated Planar and Vertical Bimorphs. , .
Kraft, M and Evans, A G R (2000) System level simulation of an electrostatically levitated disk. , .
M, Kraft (2000) Micromachined inertial sensors. The state of the art and a look into the future. IMC Measurement and Control, 33, (6), .
Sehr, H, Evans, A G R, Brunnschweiler, A and Kraft, M (2000) Design and Fabrication of a Novel Thermally Actuated Vertical Bimorph Scanner for an Integrated AFM DTIP, 2000.
Kraft, M and Lewis, C P (1998) System Level Simulation of a Digital Accelerometer.
Kraft, M, Lewis, C P and Hesketh, T G (1998) Closed Loop Silicon Accelerometers. , (5), .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1998) A Novel Micromachined Accelerometer Capacitive Interface. Snesors & Actuators, A68/1-, .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1998) A novel micromachined accelerometer capacitive interface. Sensors & Actuators, A 68, .
Lewis, C P, Hesketh, T G, Kraft, M and Florescu, M (1998) A Digital Pressure Transducer. Trans. Inst. of Meas. and Control, 20, .
Kraft, M and Lewis, C P (1997) A Generic Approach to Closed Loop, Digital Transducers. , .
Kraft, M, Lewis, C P and Hesketh, T G (1997) Control System Design Study for a Micromachined Accelerometer. , .
Kraft, M, Lewis, C P, Hesketh, T G and Szymkowiak, S (1997) A Novel Micromachined Accelerometer Capacitive Interface. 2, .
Kraft, M, Lewis, C P and Hesketh, T G (1996) Characterisation and Modelling of a Digital Micromachined Accelerometer Int Conf on System Eng. , .
Kraft, M, Lewis, C P and Hesketh, T G (1996) Development of a Digital Accelerometer for Low-frequency Structural Vibration Measurement.Proc.MTEC.
Kraft, M, Lewis, C P, Hesketh, T G and Tulmann, J (1996) Signal Pick-off in Micromachined Accelerometers. , .
Lewis, C P, Hesketh, T G and Kraft, M (1996) An Electric Current Transducer for Industrial Use. , .
Lewis, C P, Hesketh, T G and Kraft, M (1996) A Low Cost Electric Current Transducer for Industrial Use. , .
Lewis, C P and Kraft, M (1996) Simulation of a Micromachined Digital Accelerometer in SIMULINK and PSPICE. Int Conf on Control, 1, .
Lewis, C P, Kraft, M and Hesketh, T G (1996) Mathematical Model for a Micromachined Accelerometer. Trans. Inst. of Meas. and Control, 18, (2), .
This list was generated on Tue May 22 15:56:11 2012 BST.
